I think this one is going to work. It's just tacked together for now and I still need to add bracing, but you get the idea.
Social Profiles
-
Rear upper arm in place. Now I need to do it over again for the other side. -
The Miata deconstruction has begone. Next time someone remind me how much easier this would be on a lift. -
I think this one is going to work. It's just tacked together for now and I still need to add bracing, but you get the idea. -
Woo hoo, one rear lower arm done. Lots of lessons learned on this one. Here are some tips. Weld the front to rear cross brace on the i... -
I sneaked out of work a bit early today. I mean it was in the 60's today, how can you be expected to stay in the office all day :-) I... -
My copy of Build your own Spors Car on a budget showed up today. I can add it to my collection of locost books. I have to say I find the ...
-
The rear panel tubes are done. I decided to use 1" square instead of the 3/4" round. I hope that doesn't bite me later. The... -
Started on the rear lower control arms. I made a quick jig out of 1x1. The spacer on the outer end of the jig is 90mm to duplicate the spa... -
Started making the rear panel section. I first made this out of 3/4" DOM tube and tacked it in place. To make the bend I used a Home ...
