Social Profiles
-
The Miata deconstruction has begone. Next time someone remind me how much easier this would be on a lift. -
Started on the rear lower control arms. I made a quick jig out of 1x1. The spacer on the outer end of the jig is 90mm to duplicate the spa... -
Woo hoo, one rear lower arm done. Lots of lessons learned on this one. Here are some tips. Weld the front to rear cross brace on the i... -
I revived my shocks that I plan to use for the rears. QA1 82 series, 8242 is the model. 4" stroke, 9.38" compressed, 13.75"...
-
Putting everything in CAD shows that the Miata rear suspension will fit very nicely. The front not so much. The front lower Miata control...
-
Started on the rear upper control arm. This one is getting close to done. Still need to add the top plate, shock mount, weld in the thread... -
Started making the rear panel section. I first made this out of 3/4" DOM tube and tacked it in place. To make the bend I used a Home ... -
I think this one is going to work. It's just tacked together for now and I still need to add bracing, but you get the idea. -
Rear upper arm in place. Now I need to do it over again for the other side. -
I sneaked out of work a bit early today. I mean it was in the 60's today, how can you be expected to stay in the office all day :-) I...