Woo hoo. Just a small update, but my friend that works for a metal fab shop ordered the tube to get me started.
QTY 8 1 X 1 X .065 WALL X 20'
QTY 1 1 X 2 X .065 WALL X 20'
QTY 2 3/4 X 3/4 X .120 W X 24'
Should all be in next week.
Social Profiles
-
I revived my shocks that I plan to use for the rears. QA1 82 series, 8242 is the model. 4" stroke, 9.38" compressed, 13.75"...
-
Rear upper arm in place. Now I need to do it over again for the other side. -
The Miata deconstruction has begone. Next time someone remind me how much easier this would be on a lift. -
First things first. Always ware your safety gear. I didn't even notice this disk come apart until I turned off the angle grinder. Tho... -
My copy of Build your own Spors Car on a budget showed up today. I can add it to my collection of locost books. I have to say I find the ...
-
Started on the rear lower control arms. I made a quick jig out of 1x1. The spacer on the outer end of the jig is 90mm to duplicate the spa... -
I have been working on other projects, like work... and getting the mustang ready for a track event. Let me just say that Ford hydroboost i...
-
I think this one is going to work. It's just tacked together for now and I still need to add bracing, but you get the idea. -
Started on the rear upper control arm. This one is getting close to done. Still need to add the top plate, shock mount, weld in the thread... -
Woo hoo, one rear lower arm done. Lots of lessons learned on this one. Here are some tips. Weld the front to rear cross brace on the i...
